WHAT IT IS
Lumia Infrared LED Facial Device
HOW TO USE IT
Step one: Wash and dry your face. The skin should be clean, dry and free of any powder, gel or cream.
Step two: Lift the applicator from its cradle in the base unit. Press the on/off switch. The device will beep once and the indicator lights will light one after another for a short time and then the green indicator will turn steady on. Your machine is ready for the treatment.
Step three: Place the treatment probe on the area that you want to treat first. The LED light will automatically activate. Apply light pressure while slowly moving the applicator in small circular motions. The treatment probe surface treatment will slowly increase. Remove the applicator from the skin if either the skin or the applicator is too hot. Perform the treatment for five-seven minutes on each treatment area. Important: Keep the device in constant motion when in contact with the skin. Holding the device still while treating can cause redness or a mild burn.
Step four: When you are done with your treatment, turn off the applicator by pressing the on/off switch. The device will beep once and the working indicator light on the applicator will turn off.
Step five: Always apply a small amount of moisturizing cream to the treated skin areas after each session and massage it gently in circular motions.
Step six: It is imperative to clean the glass probe after each use. Unplug the device from its charging base to clean it. Clean the probe thoroughly by using dry cloth, cotton ball or paper towel. Refrain from using sanitizing substances to avoid paint damage. Only the device's glass probe is suitable for direct contact with creams and/or serums. Note: A mild redness-after each use you may notice a slight reddening of the skin of the treated area. This is normal and should fade within 24-48 hours. Discontinue use if you encounter any discomfort or skin redness that lasts for longer than 48 hours.
Style Code: 0400016635173
