For customs entry: 1.0ea
For soothing pain relief.
Feel the heat in 30 seconds
Fully washable microplush fabric pad
Weighted edges to help stay in place
2-hour auto-off
If your heating pad has a removable/washable fabric cover:
1. Lay the fabric cover on a flat surface with the printing side face down.
2. Insert the pad into the cover fully. Make sure the cord and switch stay on the outside of the cover.
3. Wait for the pad to heat up.
AUTO-OFF FEATURE
To conserve energy and prevent skin burns caused by excessive use, an auto-off feature is included. The unit will turn off automatically after two hours of continuous use. The red auto-off light will blink when this feature is activated.
USING MOIST HEAT THERAPY
To use moist heat therapy with your heating pad, use a spray bottle with water to lightly mist the surface of the pad or pat with a wet sponge. Do not soak pad. If the heating pad has a removable cover, moisten only the cover.
WASHING INSTRUCTIONS
CAUTION: DO NOT DRY CLEAN, BLEACH, OR USE WRINGER!
If your heating pad comes with a removable outer cover, follow these washing instructions.
1. Disconnect pad from outlet.
2. Remove cover from pad.
3. Machine wash only the cover in cool water or gentle cycle setting or hand wash using mild detergent.
4. Hang dry recommended.
5. Do not wash the heating pad. Wipe pad clean with damp cloth only as needed. Do not dampen the cord or connector. Hang dry and ensure completely dry before next use.
If your heating pad has a controller that disconnects from the heating pad, follow these washing instructions. Do not iron your heating pad.
1. Disconnect pad from outlet.
2. Detach pad connector from the control connector.
3. Wash by hand or an automatic washer on gentle setting.
4. Hang dry recommended. Ensure completely dry before next us.
©2020 Walgreen Co.
NEVER USE YOUR HEATING PAD WITHOUT THE FABRIC COVER.Avoid sitting on, sleeping on, and folding during use.NOTE: The "high" indicator light will blink red when an error occurs. If this happens, unplug the heating pad. Check the cord, the wall outlet, and the connection between the control connector and the pad connector. If blinking persists after you confirm proper connection, see warranty section for contact details.1. READ ALL INSTRUCTIONS.2. DO NOT USE WHILE SLEEPING.3. DO NOT USE ON AN INFANT.4. THIS PRODUCT IS NOT TO BE USED ON OR BY ANY INVALID, SLEEPING OR UNCONSCIOUS PERSON, OR A PERSON WITH POOR BLOOD CIRCULATION UNLESS CAREFULLY ATTENDED.5. DO NOT USE ON AREAS OF INSENSITIVE SKIN.6. BURNS CAN OCCUR REGARDLESS OF CONTROL SETTINGS. CHECK SKIN UNDER PRODUCT FREQUENTLY.7. NEVER USE PAD WITHOUT COVER IN PLACE.8. DO NOT USE IN AN OXYGEN-FILLED ATMOSPHERE.9. DO NOT USE PINS OR OTHER METALLIC OBJECTS TO FASTEN THIS PRODUCT INTO PLACE.10. DO NO SIT ON OR CRUSH PAD - AVOID SHARP FOLDS.11. DO NOT USE THE CORD AS A HANDLE12. CAREFULLY EXAMINE INNER COVER BEFORE EACH USE. DISCARD THE PAD IF INNER COVERING SHOWS ANY SIGN OF DETERIORATION.13. CHILDREN SHOULD NOT USE THIS UNIT WITHOUT ADULT SUPERVISION.14 PLACE UNIT ON TOP OF AND NOT UNDER THE PART OF THE BODY THAT REQUIRES HEAT THERAPY.15. ONLY USE THIS PRODUCT ON A 120V AC CIRCUIT.16. UNPLUG WHEN NOT IN USE.17. DO NOT USE WITH GENERATORS, POWER CONVERTERS, OR INVERTERS.18. DO NOT TAMPER WITH THIS PRODUCT IN ANY WAY. THERE ARE NO USER-SERVICEABLE PARTS. IF FOR ANY REASON THIS PRODUCT DOES NOT FUNCTION PROPERLY.19. DO NOT USE THIS PRODUCT WITH LINIMENT, SALVE OR OINTMENT PREPARATIONS AS SKIN BURNS CAN RESULT.20. NEVER PULL THIS PAD BY THE SUPPLY CORD.21. DO NOT BEND OR PINCH THE CORD.22. DO NOT USE PRODUCT IF THE CORD IS DAMAGED.23. LOOP CORD LOOSELY WHEN STORING. TIGHT WRAPPING CAN DAMAGE CORD & INTERNAL PARTS.24. THIS PRODUCT HAS A POLORAIZED PLUG25. TO REDUCE THE RISK OF ELECTRIC SHOCK, THIS PLUG IS INTENDED TO FIT IN A POLORAIZED OUTLET ONLY ONE-WAY. IF THE PLUG DOES NOT FIT, CONTACT A QUALIFIED ELECTRICIAN TO INSTALL THE PROPER OUTLET.26. DO NOT ATTEPT TO MODIFY THE PLUG OR DISABLE THIS SAFETY FEATURE IN ANY WAY.
itemCode 884023
UPC 31191719996
productInInches 2.78x 4.85x 10.2
restrictedStates None
shippingWeight 1.5
Description
Weighted
Moist or dry
Plush fabric
undefined
Warnings
NEVER USE YOUR HEATING PAD WITHOUT THE FABRIC COVER.
Avoid sitting on, sleeping on, and folding during use.
NOTE: The "high" indicator light will blink red when an error occurs. If this happens, unplug the heating pad. Check the cord, the wall outlet, and the connection between the control connector and the pad connector. If blinking persists after you confirm proper connection, see warranty section for contact details.
1. READ ALL INSTRUCTIONS.
2. DO NOT USE WHILE SLEEPING.
3. DO NOT USE ON AN INFANT.
4. THIS PRODUCT IS NOT TO BE USED ON OR BY ANY INVALID, SLEEPING OR UNCONSCIOUS PERSON, OR A PERSON WITH POOR BLOOD CIRCULATION UNLESS CAREFULLY ATTENDED.
5. DO NOT USE ON AREAS OF INSENSITIVE SKIN.
6. BURNS CAN OCCUR REGARDLESS OF CONTROL SETTINGS. CHECK SKIN UNDER PRODUCT FREQUENTLY.
7. NEVER USE PAD WITHOUT COVER IN PLACE.
8. DO NOT USE IN AN OXYGEN-FILLED ATMOSPHERE.
9. DO NOT USE PINS OR OTHER METALLIC OBJECTS TO FASTEN THIS PRODUCT INTO PLACE.
10. DO NO SIT ON OR CRUSH PAD - AVOID SHARP FOLDS.
11. DO NOT USE THE CORD AS A HANDLE
12. CAREFULLY EXAMINE INNER COVER BEFORE EACH USE. DISCARD THE PAD IF INNER COVERING SHOWS ANY SIGN OF DETERIORATION.
13. CHILDREN SHOULD NOT USE THIS UNIT WITHOUT ADULT SUPERVISION.
14 PLACE UNIT ON TOP OF AND NOT UNDER THE PART OF THE BODY THAT REQUIRES HEAT THERAPY.
15. ONLY USE THIS PRODUCT ON A 120V AC CIRCUIT.
16. UNPLUG WHEN NOT IN USE.
17. DO NOT USE WITH GENERATORS, POWER CONVERTERS, OR INVERTERS.
18. DO NOT TAMPER WITH THIS PRODUCT IN ANY WAY. THERE ARE NO USER-SERVICEABLE PARTS. IF FOR ANY REASON THIS PRODUCT DOES NOT FUNCTION PROPERLY.
19. DO NOT USE THIS PRODUCT WITH LINIMENT, SALVE OR OINTMENT PREPARATIONS AS SKIN BURNS CAN RESULT.
20. NEVER PULL THIS PAD BY THE SUPPLY CORD.
21. DO NOT BEND OR PINCH THE CORD.
22. DO NOT USE PRODUCT IF THE CORD IS DAMAGED.
23. LOOP CORD LOOSELY WHEN STORING. TIGHT WRAPPING CAN DAMAGE CORD & INTERNAL PARTS.
24. THIS PRODUCT HAS A POLORAIZED PLUG
25. TO REDUCE THE RISK OF ELECTRIC SHOCK, THIS PLUG IS INTENDED TO FIT IN A POLORAIZED OUTLET ONLY ONE-WAY. IF THE PLUG DOES NOT FIT, CONTACT A QUALIFIED ELECTRICIAN TO INSTALL THE PROPER OUTLET.
26. DO NOT ATTEPT TO MODIFY THE PLUG OR DISABLE THIS SAFETY FEATURE IN ANY WAY.
